Tag: roofing contractors

Roofing Repair: Why It’s Important to Get It Done Right the First Time

roofing

Repairing a roof requires major work, unlike giving your room a fresh coat of paint or new cabinets. However, Roof Repair NJ can save you a costly roof replacement.

Start by visually examining shingles, gutters, roof edges, and flashing around chimneys and dormers. Also, inspect interior spaces for water stains or sagging areas.

roofing

When shingles become damaged, they must be replaced as soon as possible to avoid roof leaks and other serious problems. The most common shingle damage is due to age and weather conditions, but it can also occur as the result of improper installation or lack of routine maintenance.

During your roof inspection, pay special attention to the flashing around chimneys, vents, and skylights. If the flashing is damaged or loose, it can trap moisture that may damage the underlying shingles and lead to leaks. Look for any signs of shingle cracking as well. While isolated shingle cracking is normal, widespread cracking is an indication that the entire roof needs to be replaced.

Blistering shingles are another sign of deteriorating shingles. They’re usually the result of trapped moisture and poor ventilation, and they’re characterized by round, concave dents embedded with shingle granules. Blistering shingles are especially susceptible to water damage, and they must be replaced to prevent leaks.

If you notice black, brown or green streaks across your roof, it’s likely the result of moss and mildew. These unsightly streaks can cause significant roofing issues, including rot and leaking. It’s important to remove these stains as soon as they appear to prevent further damage to your shingles, fascia boards and gutters.

Replacing a single damaged shingle is relatively easy, but you’ll need a few tools to do it. Start by sliding a pry bar under the shingle above it to break the seal and access the nails that keep it in place. Then, carefully yank the nails out and pull up the shingle. Replace the shingle with a new one, then secure it to the roof using a fresh set of nails.

Gutters serve a very important function—to collect and disperse rainwater away from your home. Clogged or leaky gutters can lead to a host of problems, from rusting metal to water damage to your roof and the wood fascia that supports it.

Leaking gutters are often caused by improper installation or wear, but they can also occur due to old age or the elements. If you find puddles of water around your home, paint peeling from window frames and doors, or a musty smell in the house, it may be a sign that your gutters need repair.

If your gutters are leaking because the seams are not properly sealed, this can be fixed with caulking or sealant. Make sure you use a caulk with UV protection to extend the life of your repairs. If your gutters are made of aluminum, be sure to use a caulk with gutter metal sealant, which is specially designed for this type of product.

Leaks at the gutter-to-roof junction can be caused by a loosening of the gutter hanger or corrosion of the screws that attach the gutter to the fascia board. These can be tightened with a screwdriver or drill. You can also use metal flashing to cover holes in the gutters or downspouts.

If you have a gutter that’s beginning to sag, you can usually spot this problem by sighting along the length of the gutter from the ground or from a ladder. A sagging gutter can overflow, pummel the soil or landscaping below it, and eventually cause damage to your roof or foundation. This can be fixed by repositioning the gutter hangers with a ladder or by using a power drill to screw them back in place.

Missing shingles are one of the most common roof damage issues that homeowners encounter. These shingles can be blown away during high winds, or they may have become damaged and worn over time. Regardless of how the shingle became missing, it’s important to get these repaired as soon as possible.

It’s typically best to have a professional come out and inspect the roof in order to determine what needs to be done for proper repair. Climbing on your roof to replace a single shingle can be dangerous. Not only is it a fall hazard, but there’s also the chance you could accidentally tear up and cause more damage to your home.

When shingles are intact, they provide an effective barrier against weather elements and moisture. When a shingle becomes missing, the exposed material is vulnerable to water penetration that can cause stains in the ceiling and walls of your property. These stains are a sure sign that your roof is experiencing leakage that requires immediate attention.

Although a missing shingle might not immediately cause a leak, it’s important to remember that roof leaks can lead to major problems inside your home. Moisture seepage through your roof can rot sheathing, which is then susceptible to mold and mildew growth. This can then affect the interior of your home, causing mold in the attic and even significant structural damage.

Ultimately, a missing shingle can lower your property value, which makes it essential to have it replaced as soon as possible. Additionally, a leaking roof can cause moisture to penetrate your structure and weaken the foundational beams that support your house, causing serious structural damage. This type of damage can be expensive to repair and can cause serious health issues for anyone who lives in your home.

Hail damage can be one of the most devastating roofing problems. It can cause shingles to lose their integrity and leave the roof exposed. This can lead to mold and mildew growth, as well as leaks into the home. Depending on the severity of the hail damage, homeowners may be eligible to file an insurance claim. If your roof is damaged, it is important to notify the insurer as soon as possible.

A quick inspection of your roof can help determine the extent of the damage. The easiest type of hail damage to spot is impact marks or dents. These marks and dents look like golf ball-sized hail hit the shingle and caused it to split or crack. A professional roofer can also look for more subtle signs of hail damage, such as displaced granules, discolored shingles or splits in the shingle that have sharp corners and edges.

Regardless of the type of roofing material, a damaged roof should be inspected as soon as possible after a storm. This will prevent minor issues from escalating into major problems and can extend the lifespan of your roof.

Inspecting the exterior of your property for any signs of hail damage can also help you prepare for an insurance claim. If you find any signs of hail damage on your windows, metal light fixtures, yard furniture, garage doors or mailboxes, these are good indicators that your roof may be compromised. A professional roofer can assess your property and provide an estimate for repair. They can also recommend a coating solution that will protect your roof against future hail damage. By doing so, you can avoid a costly roofing replacement in the future.

Built-up roofing, or BUR, is a time-tested and durable roofing system that offers reliable waterproofing, insulation, and fire resistance. Its layered construction makes it ideal for flat and low-sloped roofs in commercial, industrial, and high-traffic buildings.

Depending on the type of bitumen and ply sheets used, built-up roofing systems can last 15-30 years or more. They typically perform better in warmer climates, where their multiple layers protect against the sun’s harmful UV rays and limit heat transfer.

The multi-layered nature of built-up roofing also helps to insulate a building, reducing the need for frequent heating or cooling. This reduces energy consumption and related environmental impact, contributing to significant cost savings for the building owner and occupants.

While built-up roofs are highly durable, they are not impervious to leaks or damage. Like other roofing types, they require regular inspection and maintenance to keep them in peak condition. If not repaired quickly, a simple problem can turn into a major leak or structural failure.

Leaks can be difficult to spot due to the many layers of felt and asphalt that make up a built-up roof. This is why it’s important to have routine roof inspections so minor problems can be addressed before they turn into serious issues.

When a built-up roof is in need of repair, an experienced roofing contractor can assess the situation and recommend the right course of action. They may choose to replace a damaged section of the roof, or they might be able to patch it with an elastomeric coating. Whatever the case, a professional roofing company will ensure that the repair work is done correctly and that the roof is watertight.